Masonry Contractor in Attleboro, MA

Masonry Work That Actually Lasts

Your chimney, fireplace, and stonework deserve more than a quick fix. You need masonry contractor expertise that prevents costly water damage and structural problems before they start.

A person wearing a green shirt uses a trowel to spread mortar between concrete blocks while building an outdoor wall, with sunlight and green foliage visible in the background.

Hear from Our Customers

A construction worker wearing an orange shirt and gloves spreads mortar with a trowel while building a brick wall. The worker’s face is not visible, and partially completed brickwork is seen in the background.

Chimney Masonry Contractor Attleboro

What Proper Masonry Work Gets You

When your masonry is done right, you stop worrying about water seeping through cracked mortar joints. You don’t lose sleep over freeze-thaw damage that weakens your chimney each winter.

Your fireplace becomes a source of comfort, not concern. The stonework around your property adds value instead of becoming a liability that costs thousands to fix later.

That’s what happens when you work with masonry contractors who understand Bristol County’s climate and know how coastal moisture affects brickwork. Your investment pays off in peace of mind and a home that stands strong for decades.

Masonry Services Attleboro MA

25 Years of Getting It Right

Above and Beyond Chimney has been serving Attleboro and Bristol County since before most contractors even knew what tuckpointing was. We’ve seen what happens when masonry work is rushed or corners are cut.

We’ve also seen the difference it makes when you take the time to do it properly. Our CSIA-certified technicians understand the specific challenges that New England weather throws at your masonry.

From Attleboro’s historic homes to newer construction, we’ve worked on chimneys and stonework that needed to stand up to everything from nor’easters to summer humidity. That experience shows in every project we complete.

A construction worker wearing an orange shirt and a black glove carefully places a brick onto a partially built brick wall, aligning it precisely with a taut guide string.

Fireplace Masonry Repair Process

How We Handle Your Masonry Project

We start with a thorough inspection of your chimney, fireplace, or stonework. No quick glances or rushed estimates. We look for the problems you can see and the ones you can’t.

Then we explain exactly what needs to be done and why. You’ll understand whether you need simple repointing or more extensive restoration work. We use materials specifically chosen for New England’s climate conditions.

During the work, we protect your home with multiple layers of drop cloths and use HEPA-filtered vacuums designed for masonry debris. When we’re finished, your property looks exactly as we found it – except for the improved masonry work that will serve you for years to come.

A person wearing black gloves uses a trowel to spread mortar onto a brick wall under construction, with a taut guideline string running across the top row of bricks for alignment.

Ready to get started?

About Above and Beyond Chimney Service

Get a Free Consultation

Custom Masonry Work Attleboro

What's Included in Our Masonry Services

Our masonry services cover everything from chimney crown repairs to complete fireplace restoration. We handle tuckpointing that restores both the appearance and structural integrity of your brickwork.

In Attleboro’s climate, where winter freeze-thaw cycles can cause serious damage, we pay special attention to waterproofing and proper mortar selection. We’ve seen too many chimneys fail because the wrong materials were used or shortcuts were taken.

Whether you need custom stonework for a new patio or emergency repairs after storm damage, we bring the same level of craftsmanship to every project. Our work comes with the confidence that it’s been done right the first time, using techniques that have been proven over decades of New England weather.

A construction worker wearing gloves and jeans uses a rubber mallet to tap concrete blocks into alignment while building a straight wall with mortar on a sunny day.

How do I know if my chimney needs masonry repair?

Look for white staining on the outside of your chimney, which indicates water penetration. Check for loose or cracked mortar joints, especially near the roofline where weather exposure is greatest.If you notice water stains on interior walls near your fireplace or a musty smell, these are signs of water getting through compromised masonry. Small cracks in the crown or cap should be addressed quickly before they allow more water in.The freeze-thaw cycles we get in Attleboro can turn minor issues into major problems fast. What starts as a small crack can spread throughout the chimney structure if left untreated.
Repointing involves removing deteriorated mortar and replacing it with new mortar that matches the original. This works when the bricks are still in good condition but the mortar joints have failed.Rebuilding becomes necessary when the masonry damage is extensive – usually when water has been getting in for years and has compromised the structural integrity. We remove damaged sections and rebuild them with new materials.The key is catching problems early. Repointing costs a fraction of what rebuilding does, which is why regular inspections matter. In Bristol County’s climate, we typically recommend checking masonry every few years.
Properly done tuckpointing should last 20-30 years in our climate, but it depends on the quality of materials and workmanship. Cheap mortar or rushed work might only last 5-10 years.The key is using mortar that’s compatible with your existing masonry and appropriate for New England’s freeze-thaw conditions. We match the strength and composition of the original mortar, not just the color.Weather exposure makes a big difference too. South-facing walls that get more sun and rain typically need attention sooner than protected areas. That’s why we inspect the entire structure, not just the obvious problem spots.
Absolutely. Water that gets through compromised masonry doesn’t just damage the chimney – it can cause problems throughout your home. We’ve seen water stains on ceilings, damaged drywall, and even structural issues in basements.The problem is that water finds the path of least resistance. It might enter through a crack in your chimney crown but show up as a leak in your living room. By the time you notice interior damage, the masonry problem has usually been going on for a while.This is why addressing masonry issues quickly saves money in the long run. Fixing a small mortar problem costs much less than dealing with water damage throughout your home.
Look for contractors with specific masonry experience, not just general construction. Ask about their training – CSIA certification for chimney work is important. Make sure they’re licensed and insured for your protection.Get references from recent projects and actually call them. A good contractor will be happy to provide references and explain their process in detail. Be wary of anyone who asks for large deposits upfront or pressures you to sign immediately.Ask about the materials they use and why. In New England, the wrong mortar mix can cause problems within a few years. A knowledgeable contractor will explain their material choices and why they’re appropriate for your specific situation.
Simple repointing might cost a few hundred dollars, while extensive restoration can run several thousand. The wide range depends on how much damage there is and how long problems have been developing.Crown repairs typically run around $1,500, but costs vary based on chimney size and accessibility. Complete rebuilds from the roofline up can cost significantly more, which is why catching problems early matters.We always provide detailed estimates that break down exactly what work is needed and why. No surprises, no hidden costs. The investment in proper masonry work pays off in preventing much more expensive problems down the road.